| |
| |
Electronic
Transformers |
|
| |
|
|
| |
Our Electronic
Transformers for halogen spot lamps are most reliable, compact &
sleek, solid epoxy filled. These electronic transformers have been
dimensioned as per specifications with inbuilt input & output
port connector / wires to facilitate convenient installation in
any small space or compact fixtures. Electronic transformers are
very small and light compared to magnetic transformers. In most cases
small enough so that the fixture manufacturers can often incorporate
them within a lighting product.
Electronic transformers for Low voltage halogen lamps have to reduce
mains voltage to 12 V AC and maintain this precise voltage with
the least possible variation so that the ideal lamp life and luminous
flux is obtained from the low voltage halogen lamp.
Circuit designs for all Electronic Transformers include all the
state of art features like input mains interference, fluctuations,
spike & surge EMI / RFI suppression, output short circuit protection
with auto restart, no load & over load protection, abnormal
conditions protection, internal heat/power loss control, near to
unity power factor, energy efficient with elegant aesthetic in thermoplastic
castings. We manufacture eight different models of Electronic Transformer
for low voltage dichotic, high impact Halogen spot lamps
|
|
| |
|
|
|
|
|
|
|
| |
Electronic
Ballasts |
| |
The Electronic Ballast EBQ-40 (QLV) for 36/40 W FTL, EBQ-15 PLS for CFL
down lights and EBQ-2x15 PLD for combination of 2 CFLs ranging from
9W-18W are most reliable, compact, sleek, 30%-50% reduction in energy
consumption compared with conventional control gear (magnetic choke)
and stabilized light independent of mains voltage fluctuations.
Our all the
products have been registered under Design Act by The Patent Office,
Govt. of India, Kolkata.
Circuit designs
for all Electronic Ballasts include all the state of art features
like input mains interference, fluctuations, spike & surge EMI
/ RFI suppression, output short circuit protection with auto restart,
no load & over load protection, abnormal conditions protection,
internal heat/power loss control, near to unity power factor, energy
efficient with elegant aesthetic in thermoplastic castings. We manufacture
three different models of Electronic Ballasts for low voltage dichotic,
high impact flourescent lamps
|
|
|
know
more about electronic ballasts>> |
|
|
LED
Bulbs, Lamp & Drivers |
| |
LEDs lowers running costs and eliminates
the hassle of repeated relamping in busy areas like corridors,
restaurants and bars. The energy-efficient LEDs keeps on burning for
up to 45,000 hours significantly reducing the time spent on replacing
defective lamps. LEDs also cuts your running costs. Energy prices are
rising, and lighting accounts for more than 25% of a hotel’s energy
bill. LEDs enables energy savings of up to 80% while maintaining the
same light level.
Our electronic LED Drivers are best suitable companions for the high
power LEDs |
| |
know more about LED Drivers>> |
|
|
|
